Skip to product information
Soulnote D-1 Version 2 DAC D/A Wandler
1/5

Soulnote D- 1 Version 2 DAC D/A Wandler

€4.490,00 EUR
FarbeSilber


Soulnote D-1 ver.2

D/A-WANDLER – erhältlich in Premium Silber / Premium Schwarz

Der D-1 ver.2 übernimmt zentrale Schaltungsprinzipien der Serie 3 und setzt sie in einem kompakten DAC-Konzept um: New Type-R für die Analogsektion, eine widerstandsbasierte I/V-Umsetzung sowie eine konsequent getrennte, mehrfach geregelte Stromversorgung. Der D-1 ver. 2 zielt auf eine besonders stabile Zeitachsenwiedergabe, hohe Ruhe und eine präzise räumliche Abbildung – unabhängig von Quelle und Eingangsformat.

 

New Type-R-Schaltung aus dem E-3, für DAC optimiert

Die Analogsektion verwendet die New Type-R-Schaltung, die für den E-3 entwickelt und für den DAC-Einsatz optimiert wurde. Auch die Stromversorgung setzt auf dasselbe Reglerprinzip ohne Gegenkopplung (diskreter High-Speed-Regler) wie das höher positionierte Modell.

Widerstandsbasierte I/V-Umsetzung

Für die I/V-Wandlung (Strom-zu-Spannung) kommt – wie im fortschrittlichen Modell – eine ohmsche, widerstandsbasierte I/V-Schaltung zum Einsatz. Damit wird eine analoge Ausgangsstufe realisiert, die ohne eine klassische, rückgekoppelte I/V-Topologie auskommt.

ES9038PRO getrennt für linken und rechten Kanal

Die ESS-DACs sind links und rechts getrennt angeordnet. Dadurch arbeiten die Kanäle mit eigenständiger Umsetzung und Versorgung, was die Kanaltrennung unterstützt und die Stromausgangs-Ressourcen der ES9038PRO konsequent nutzbar macht.


Minimaler Einsatz analoger Tiefpassfilter

Durch die weitgehende Reduzierung eines analogen LPF (Low-Pass-Filters) wird der Signalweg in der Analogsektion möglichst direkt gehalten. Dieser Ansatz ist nicht nur im PCM-Betrieb relevant, sondern wirkt sich auch bei DSD positiv aus.

FIR-Oversampling und zusätzlich NOS-Modus (Non-Oversampling)

Neben dem FIR-Oversampling-Modus steht ein NOS-Modus zur Verfügung. NOS arbeitet ohne Oversampling und vermeidet damit die in FIR-Filtern prinzipbedingt entstehenden Vor- und Nachschwingeffekte (Pre-/Post-Echo) in der Impulsantwort. Der NOS-Modus priorisiert eine besonders direkte Zeitachsenwiedergabe und eine natürliche Impulsdarstellung.

Hinweis: DSD wird nicht im NOS-Modus wiedergegeben.

260 VA Ringkerntransformator und Netzteil in Verstärker-Größenordnung

Als Leistungstransformator wird ein großer, nicht imprägnierter 260-VA-Ringkerntransformator eingesetzt. Die Stromversorgung ist auf ein leistungsstarkes, diskretes Konzept ausgelegt. Für die rückkopplungsfreie Verstärkersektion sind dabei vergleichsweise hohe Versorgungsspannungen vorgesehen (±43 V), um eine Kombination aus kräftiger Wiedergabe und feiner räumlicher Differenzierung zu unterstützen.

Acht getrennte Netzteile mit diskreten High-Speed-Reglern

Für die DAC-Peripherie sind mehrere, getrennte Versorgungszweige vorgesehen: analoge und digitale DAC-Versorgung jeweils links und rechts, plus dedizierte Netzteile für Quarz, USB, Logik sowie den S/PDIF-Differentialempfänger. Alle acht Versorgungen arbeiten mit SOULNOTEs originalem diskreten High-Speed-Regler ohne Gegenkopplung, abgestimmt auf hohe Klangqualität und die Stromanforderungen des ES9038PRO.

Direkte mechanische Erdung / kontrollierte Ableitung von Transformatorvibrationen

Durch eine dreipunktige Abstützung (vorn sowie hinten links/rechts) können die Füße so positioniert werden, dass sie direkt unter dem Transformator wirken. Transformatorvibrationen werden dadurch gezielt aus dem Chassis abgeleitet, was Gehäuseresonanzen reduziert und ein ruhigeres, sauberer konturiertes Klangbild unterstützt.

SPEZIFIKATIONEN

Modell D-1 VER2 SF (Premium Silver) / D-1 VER2 BF (Premium Black)
Eingangsformat USB: PCM, DSD (DoP v1.1, ASIO)
Koaxial, AES/EBU: PCM, DSD (DoP v1.1)
Unterstützte Abtastraten USB: bis 768 kHz (PCM) / bis 22,6 MHz (DSD)
Koaxial/AES/EBU: bis 192 kHz (PCM) / 2,8 MHz (DSD64, DoP v1.1)
PCM-Quantisierungsbitrate USB: 16 Bit / 24 Bit / 32 Bit
PCM
Koaxial/AES/EBU: 16 Bit / 24 Bit
USB-Profil USB 2.0, USB Audio 2.0
Digitale Eingänge USB (Typ B), 2× Koaxial (S/PDIF), AES/EBU

Analoge Ausgänge 1× Balanced, 1× Unbalanced
Ausgangspegel Balanced: 5,8 Vrms
Unbalanced: 2,9 Vrms
Frequenzgang 2 Hz bis 120 kHz (+0/–1 dB)

S/N-Verhältnis 110 dB
Gesamtklirrfaktor 0,08 %

Analogfilter primär passiv
Netzspannung 230 V AC, 50 Hz

Leistungsaufnahme 20 W (J60065)

Abmessungen (B x H x T) 430 × 109 × 379 mm
Gewicht 10 kg
Zubehör Spikes, Stromkabel
Safety instructions

Electronic devices:
1. General Use: • Electronic devices are designed for use in enclosed, dry rooms only. Direct sunlight, moisture, and extreme temperatures may impair function. • Avoid proximity to water sources or other liquids. 2. Electrical Safety: • Use only with the specified power source (e.g., 220-240 V AC). An incorrect power source may damage the device or be hazardous. • Never connect the device to overloaded outlets or extension cords. • If there is any visible damage to the power cord or other components, do not operate the device. 3. Operation and Ventilation: • Place the device on a stable, flat surface. Do not block any ventilation slots to prevent overheating. • Ensure sufficient distance from other devices or walls (at least 10 cm) to ensure optimal ventilation. 4. Children and Pets: • Keep the device away from children and pets, especially small parts that could be swallowed.
Speakers:
1. Setup: • Place speakers on a stable and secure surface or use suitable speaker stands. Tipping over may cause injury or damage. • Position speakers so they are not obstructed and optimal sound dispersion is ensured. 2. Environmental Conditions: • Speakers are intended for use in dry, enclosed spaces. Avoid moisture and direct sunlight, which could damage materials or electronics. 3. Connections: • Use only compatible amplifiers and cables that meet the speaker's technical specifications. • Avoid incorrect polarity connections to prevent damage to the speaker or amplifier. 4. Children and Pets: • Speakers are not toys. Make sure they are placed out of reach of children and pets. 5. Care: • Clean the surface with a soft, dry cloth. Do not use chemical cleaners or water.
Cable:
1. Use: • Cables are for their intended use only. Use them only with devices that meet the cable's technical specifications. • Ensure that all connections are secure and tight for optimum performance. 2. Handling: • Never pull on the cable to remove it from a device. Always hold the plug firmly. • Do not bend, overstretch, or place excessive strain on the cable. Cables should not run under heavy objects. 3. Children and Pets: • Keep cables away from children and pets as they can be a strangulation or injury hazard. 4. Inspection: • Check cables regularly for visible damage such as breaks, cracks, or frayed ends. Damaged cables must be replaced immediately.
Accesories:
1. Use: • Accessories such as adapters, mounts or cleaning utensils must only be used for their intended purpose. Incorrect use can cause damage. 2. Care: • Clean accessories only according to the manufacturer's instructions. Avoid harsh cleaning agents or use in damp environments. 3. Safety: • Ensure accessories are correctly fitted or connected to prevent accidents or malfunctions. 4. Children and pets: • Accessories, especially small parts, pose a choking hazard and should be kept out of reach of children and pets.

Common instructions for all categories: • Operating instructions: Read the operating instructions carefully before using the product. • Repairs: Do not open or repair the product yourself. Contact an authorized service partner or the manufacturer. • Contact us if you have any questions: We are always available to answer any questions you may have about the safe use of our products.

Manufacturer information & EU contact

IAD GMBH
Johann-Georg-Halske-Str. 11
41352 Korschenbroich
Deutschland

Tel. +49(0)2161-61783-0
E-Mail: hifi@iad-gmbh.de

Related items